View LP101WH1-TLA3_4507263.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product specification 1/ 27 lp101wh1 liquid crystal display ver. 1.0 nov. 5 2009 specification for approval title 10.1? hd tft lcd customer dell model supplier lg display co., ltd. *model lp101wh1 suffix tla3 *when you obtain standard approval, please use the above model name without suffix ( ) preliminary specification ( ) final specification approved by signature / / / please return 1 copy for your confirmation with your signature and comments. products engineering dept. lg display co., ltd prepared by reviewed by signature approved by s. w. paeng / manager m. g. park / engineer c. j. jun / manager www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 2/ 27 lp101wh1 liquid crystal display ver. 1.0 nov. 5 2009 contents no item page cover 1 contents 2 record of revisions 3 1 general description 4 2 absolute maximum ratings 5 3 electrical specifications 3-1 electrical charactreistics 6 3-2 interface connection 7 3-3 lvds signal timing specifications 8 3-4 signal timing specifications 10 3-5 signal timing waveforms 10 3-6 color input data refernece 11 3-7 power sequence 12 4 optical sfecifications 13 5 mechanical characteristics 16 6 reliablity 20 7 international standards 7-1 safety 21 7-2 emc 21 8 packing 8-1 designation of lot mark 22 8-2 packing form 22 9 precautions 23 a appendix. enhanced extended display identification data 25 www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 3/ 27 lp101wh1 liquid crystal display ver. 1.0 nov. 5 2009 record of revisions revision no revision date page description edid ver 0.0 aug. 13. 2009 all first draft (preliminary specification) - 0.1 oct.30.2009 13 color coordinates is changed. - 1.0 nov. 5.2009 all final www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 4/ 27 lp101wh1 liquid crystal display ver. 1.0 nov. 5 2009 1. general description general features active screen size 10.1 inches diagonal outline dimension 235(h) 143(v) .5.2(d,max.) [mm] pixel pitch 0.16305mm 0.16305 mm pixel format 1366 horiz. by 768 vert. pixels rgb strip arrangement color depth 6-bit, 262,144 colors luminance, white 250 cd/m 2 (typ.5 point) power consumption total 3.46 watt(typ.) @ lcm circuit 1. 16 watt(typ.), b/l input 2.3 watt(typ.) (w/o led driver) weight 200g (max.) display operating mode transmissive mode, normally white surface treatment glare treatment of the front polarizer rohs comply yes the lp101wh1 is a color active matrix liquid crystal display with an integral led backlight system. the matrix employs a-si thin film transistor as the active element. it is a transmissive type display operating in the normally white mode. this tft-lcd has 10.1inches diagonally measured active display area with hd resolution(1366 horizontal by 768 vertical pixel array). each pixel is divided into red, green and blue sub- pixels or dots which are arranged in vertical stripes. gray scale or the brightness of the sub-pixel color is determined with a 6-bit gray scale signal for each dot, thus, presenting a palette of more than 262,144 colors. the lp101wh1 has been designed to apply the interface method that enables low power, high speed, low emi. the lp101wh1 is intended to support applications where thin thickness, low power are critical factors and graphic displays are important. in combination with the vertical arrangement of the sub-pixels, the lp101wh1 characteristics provide an excellent flat display for office automation products such as notebook pc. control & data power edid signal & power tft-lcd pa ne l (1366 x 768) 1 768 1 1366 cn 1 us er connec tor 40 pin power bloc k edid bloc k gip(gate in panel) so urce driver circuit le d ba cklig ht a ss?y lvds & tim in g c ontro l block pwm & vb l www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 5/ 27 lp101wh1 liquid crystal display ver. 1.0 nov. 5 2009 2. absolute maximum ratings the following are maximum values which, if exceeded, may cause faulty operation or damage to the unit. table 1. absolute maximum ratings storage operation 10 20 30 40 50 60 70 80 0 -20 dry bulb temperature [ ] 10 % 20 % 40 % 60 % 90% 80% 0 10 20 30 40 50 60 wet bulb temperature [ ] humidity[(%)rh] parameter symbol values units notes min max power input voltage vcc -0.3 4.0 vdc at 25 5 c operating temperature t op 0 50 c 1 storage temperature h st -20 60 c 1 operating ambient humidity h op 10 90 %rh 1 storage humidity h st 10 90 %rh 1 note : 1. temperature and relative humidi ty range are shown in the figure below. wet bulb temperature should be 39 c max, and no condensation of water. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 6/ 27 lp101wh1 liquid crystal display ver. 1.0 nov. 5 2009 3. electrical specifications 3-1. electrical characteristics table 2. electrical characteristics note) 1. the specified current and power consumption are under the vcc = 3.3v , 25 , fv = 60hz condition whereas mosaic pattern is displayed and fv is the frame frequency. 2. this impedance value is needed to proper display and measured form lvds tx to the mating connector. 3. the typical operating current is for the typical surface luminance (l wh ) in optical characteristics. i led is the current of each led?s string, led backlight has 4 strings on it. 4. the led power consumption shown above does not include power of external led driver circuit for typical current condition. 5. the life time is determined as the time at which brig htness of led is 50% compare to that of initial value at the typical led current. parameter symbol values unit notes min typ max module : power supply input voltage vcc 3.0 3.3 3.6 v dc power supply input current i cc - 350 402 ma 1 power consumption pc - 1.16 1.33 watt 1 differential impedance zm 90 100 110 ohm 2 led backlight ( with led driver ) : led driver ( @12v ) p driver - 0.21 0.25 watt operating voltage v led - 28.85 32.4 v operating current per string i led - 20 ma 3 power consumption p bl - 2.3 2.592 watt 4 life time 10,000 hrs 5 the lp101wh1 requires two power inputs. one is employed to power the lcd electronics and to drive the tft array and liquid crystal. the sec ond input which powers the led bl. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 7/ 27 lp101wh1 liquid crystal display ver. 1.0 nov. 5 2009 3-2. interface connection table 3. module connector pin configuration (cn1) this lcd employs one interface connection, a 40 pin connec tor is used for the module electronics interface. 1, interface chips 1.1 lcd : siw, 1port including lvds receiver 1.2 system : * pin to pin compatible with lvds 2. connector 2.1 lcd :i-pex 20455-040e-0* (locking type) or equivalent 2.2 mating : 2.3 connector pin arrangement 1 40 [lcd module rear view] pin symbol description notes 1 ct1/nc connector test/no connection(reserved) 2 vdd +3.3v power supply 3 vdd +3.3v power supply 4 v edid +3.3v edid power 5 test panel self test 6 clk edid edid clock input 7 data edid edid data input 8 rxin0- lvds differential data input 9 rxin0+ lvds differential data input 10 gnd ground 11 rxin1- lvds differential data input 12 rxin1+ lvds differential data input 13 gnd ground 14 rxin2- lvds differential data input 15 rxin2+ lvds differential data input 16 gnd ground 17 rxclkin- lvds differential clock input 18 rxclkin+ lvds differential clock input 19 gnd ground 20 nc no connection 21 nc no connection 22 gnd ground 23 nc no connection 24 nc no connection 25 gnd ground 26 nc no connection 27 nc no connection 28 gnd ground 29 nc no connection 30 nc no connection 31 vled_gnd led ground 32 vled_gnd led ground 33 vled_gnd led ground 34 ct2/nc connector test/no connection(reserved) 35 s_pwmin system pwm signal input(+3.3v swing) 36 bl_on led enable(3.3v input) [note 1] 37 nc no connection 38 vled 7~21v led power supply 39 vled 7~21v led power supply 40 vled 7~21v led power supply [note 1] on: 2.0v ,off:0~0.4v www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 8/ 27 lp101wh1 liquid crystal display ver. 1.0 nov. 5 2009 description symbol min max unit notes lvds clock to data skew margin t skew - 400 + 400 ps 85mhz > fclk 65mhz t skew - 600 + 600 ps 65mhz > fclk 25mhz lvds clock to clock skew margin (even to odd) t skew_eo -1/7 + 1/7 t clk - maximum deviation of input clock frequency during ssc f dev - 3 % - maximum modulation frequency of input clock during ssc f mod - 200 khz - description symb ol min max unit notes lvds differential voltage |v id | 100 600 mv - lvds common mode voltage v cm 0.6 1.8 v - lvds input voltage range v in 0.3 2.1 v - 3-3-1. dc specification 3-3-2. ac specification 3-3. lvds signal timing specifications www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 9/ 27 lp101wh1 liquid crystal display ver. 1.0 nov. 5 2009 < clock skew margin between channel > < lvds data format > 3-3-3. data format - lvds 1 port < spread spectrum > time f center f max f min f mod 1 f center * f dev freq. g 0 r 5 r 4 r 3 r 2 r 1 r 0 b 1 b 0 g 5 g 4 g 3 g 2 g 1 de vsync hsync b 5 b 4 b 3 b 2 x b 7 b 6 g 7 g 6 r 7 r 6 r 1 r 0 g 2 g 1 b 3 b 2 r 7 r 6 g 0 b 1 de x current ( nth ) cycle r 5 r 4 b 0 g 5 vsync hsync b 7 b 6 r 3 r 2 g 4 g 3 b 5 b 4 g 7 g 6 previous ( n - 1 ) th cycle next ( n + 1 ) th cycle rclk+ ra+/- rb+/- rc+/- rd+/- www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 10 / 27 lp101wh1 liquid crystal display ver. 1.0 nov. 5 2009 3-4. signal timing specifications table 5. timing table this is the signal timing required at the input of the us er connector. all of the interface signal timing should be satisfied with the following specifications and spec ifications of lvds tx/rx for its proper operation. 3-5. signal timing waveforms condition : vcc =3.3v low: 0.3vcc high: 0.7vcc data enable, hsync, vsync hsync data enable vsync data enable t wh t hp t hfp t hbp t vp t wv t vbp t vfp t wha t wva t clk 0.5 vcc dclk item symbol min typ max unit note dclk frequency f clk - 72.3 - mhz hsync period thp 1470 1526 1586 tclk width t wh 23 32 40 width-active t wha 1366 1366 1366 vsync period t vp 779 790 801 thp width t wv 2 5 8 width-active t wva 768 768 768 data enable horizontal back porch t hbp 72 80 124 tclk horizontal front porch t hfp 8 48 48 vertical back porch t vbp 8 14 20 thp vertical front porch t vfp 1 3 5 www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 11 / 27 lp101wh1 liquid crystal display ver. 1.0 nov. 5 2009 3-6. color input data reference the brightness of each primary color (red,green and blue) is based on the 6-bit gray scale data input for the color ; the higher the binary input, the brighter the color. the table below provides a reference for color versus data input. table 7. color data reference color input color data red msb lsb green msb lsb blue msb lsb r5 r4 r3 r2 r1 r0 g5 g4 g3 g2 g1 g0 b5 b4 b3 b2 b1 b0 basic color black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 green 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 blue 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 cyan 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 magenta 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 yellow 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 white 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 red red (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red (01) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 ? ? ? ? red (62) 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 red (63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 green green (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green (01) 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 ... ? ? ? green (62) 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 green (63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 blue blue (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (01) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 ? ? ? ? blue (62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 blue (63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 12 / 27 lp101wh1 liquid crystal display ver. 1.0 nov. 5 2009 3-7. power sequence note) 1. valid data is data to meet ?3-3. lvds signal timing specifications? 2. please avoid floating state of interface signal at invalid period. 3. when the interface signal is invalid, be sure to pull down the power supply for lcd vcc to 0v. 4. led power must be turn on after power supply for lcd and interface signal are valid. parameter value units min. typ. max. t 1 0.5 - 10 (ms) t 2 0 - 50 (ms) t 3 200 - - (ms) t 4 200 - - (ms) t 5 0 - 50 (ms) t 6 3 - 10 (ms) t 7 400 - - (ms) table 7. power sequence table t 6 interface signal, v i (lvds signal of transmitter) led power (vled,bl_on,s_pwmin signal :refer to table 3.) power supply for lcd (vcc) 90% 10% 10% 0v 90% t 1 t 2 t 5 valid data 0v off off led on t 7 t 3 t 4 www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 13 / 27 lp101wh1 liquid crystal display ver. 1.0 nov. 5 2009 4. optical specification fig. 1 optical characteristic measurement equipment and method table 8. optical characteristics ta=25 c, vcc=3.3v, f v =60hz, f clk = 72.3mhz, i bl = 20 ma parameter symbol values units notes min typ max contrast ratio cr 500 - - 1 surface luminance, white l wh 230 250 - cd/m 2 2 luminance variation white - 1.4 1.6 3 response time tr r + tr d - 16 25 ms 4 color coordinates red rx 0.568 0.598 0.628 ry 0.312 0.342 0.372 green gx 0.281 0.311 0.341 gy 0.569 0.599 0.629 blue bx 0.123 0.153 0.183 by 0.089 0.119 0.149 white wx 0.283 0.313 0.343 wy 0.299 0.329 0.359 viewing angle 5 x axis, right( =0 ) r 30 - - degree x axis, left ( =180) l 30 - - degree y axis, up ( =90 ) u 10 - - degree y axis, down ( =270) d 20 - - degree gray scale 2.2 6 lcd module optical stage(x,y) pritchard 880 or equivalent 50cm optical characteristics are determined after the unit has been ?on? and stable for approximately 30 minutes in a dark environment at 25 c . the values specified are at an approximate distance 50cm from the lcd surface at a viewing angle of and equal to 0 . fig. 1 presents additional information conc erning the measurement equipment and method. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 14 / 27 lp101wh1 liquid crystal display ver. 1.0 nov. 5 2009 gray level luminance [%] (typ) l0 0.24 l7 0.74 l15 2.57 l23 6.75 l31 15.48 l39 32.89 l47 56.63 l55 76.95 l63 100 note) 1. contrast ratio(cr) is defined mathematically as surface luminance with all white pixels contrast ratio = surface luminance with all black pixels 2. surface luminance is the average of 5 point across the lcd surface 50cm from the surface with all pixels displaying white. for more information see fig 1. l wh = average(l 1 ,l 2 , ? l 5 ) 3. the variation in surface luminance , the panel total variation ( white ) is determined by measuring l n at each test position 1 through 13 and then defined as followed numerical formula. for more information see fig 2. maximum(l 1 ,l 2 , ? l 13 ) white = minimum(l 1 ,l 2 , ? l 13 ) 4. response time is the time required for the display to transition from white to black (rise time, tr r ) and from black to white(decay time, tr d ). for additional information see fig 3. 5. viewing angle is the angle at which the contra st ratio is greater than 10. the angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the lcd surface. for more information see fig 4. 6. gray scale specification * f v = 60hz www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 15 / 27 lp101wh1 liquid crystal display ver. 1.0 nov. 5 2009 fig. 3 response time the response time is defined as the following figure and shall be measured by switching the input signal for ?black? and ?white?. tr r tr d 100 90 10 0 % optical response white black white fig. 2 luminance : active area a : h/4 mm b : v/4 mm points: 13 points h,v active area 1 3 2 5 4 h a b v 6 7 8 9 10 11 12 13 10mm 10mm fig. 4 viewing angle normal y eye = 0 , right = 180 , left = 270 , down = 90 , up www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 16 / 27 lp101wh1 liquid crystal display ver. 1.0 nov. 5 2009 5. mechanical characteristics the contents provide general mechanical characteristic s for the model lp101wh1. in addition the figures in the next page are detailed mechanical drawing of the lcd. outline dimension horizontal 235.0 0.5 mm vertical 143.0 0.5 mm thickness 5.2mm (max) bezel area horizontal 226.00 mm vertical 128.70 mm active display area horizontal 222.73 mm vertical 125.22 mm weight 200g (max.) surface treatment glare treatment of the front polarizer www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 17 / 27 lp101wh1 liquid crystal display ver. 1.0 nov. 5 2009 note) unit:[mm], general tolerance: 0.5mm www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 18 / 27 lp101wh1 liquid crystal display ver. 1.0 nov. 5 2009 note) unit:[mm], general tolerance: 0.5mm www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 19 / 27 lp101wh1 liquid crystal display ver. 1.0 nov. 5 2009 * mounting screw length (a) = 1.5(min) /1.8(max) * mounting screw hole depth (b) = 1.8(min) * mounting hole location : 2.8(typ.) * torque : 2.0 kgf.cm(max) (measurement gauge : torque meter) section a-a [ detail description of side mounting screw ] notes : 1. screw plated through the method of non-electrolytic nickel plating is preferred to reduce possibility that results in vertical and/or horizontal line defect due to the conductive particles from screw surface. * ppid label revision : it is subject to change with dell event. please refer to the below table for detail. classification no change 1st revision 2nd revision ? 9th revision ? sst(ws) x00 x01 x02 ? a09 ? pt(es) x10 x11 x12 ? a19 ? st(cs) x20 x21 x22 ? a29 ? xb(mp) a00 a01 a02 ? a09 ? * ppid label revision 37 mm 78 mm [ detail information of ppid label and revision code ] www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 20 / 27 lp101wh1 liquid crystal display ver. 1.0 nov. 5 2009 6. reliability environment test condition { result evaluation criteria } there should be no change which might affect the practical display function when the display quality test is conducted under normal operating condition. no. test item conditions 1 high temperature storage test ta= 60 c, 240h 2 low temperature storage test ta= -20 c, 240h 3 high temperature operation test ta= 50 c, 50%rh, 240h 4 low temperature operation test ta= 0 c, 240h 5 vibration test (non-operating) random, 1.0grms, x,y,z direction test time : each direction 1hour 6 shock test (non-operating) half sine wave, 180g, 2ms one shock of each six faces(i.e. run 180g 6ms for all six faces) 7 altitude operating storage / shipment 0 ~ 10,000 feet (3,048m) 24hr 0 ~ 40,000 feet (12,192m) 24hr www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 21 / 27 lp101wh1 liquid crystal display ver. 1.0 nov. 5 2009 7. international standards 7-1. safety 7-2. emc a) ansi c63.4 ?methods of measurement of radio- noise emissions from low-voltage electrical and electrical equipment in the range of 9khz to 40ghz. ?american national standards institute(ansi), 1992 b) c.i.s.p.r ?limits and met hods of measurement of radio interf ace characteristics of information technology equipment.? international special committee on radio interference. c) en 55022 ?limits and methods of measurement of radio interface characteristics of information technology equipment.? european committee for electrotechnical standardization.(cenelec), 1998 ( including a1: 2000 ) a) ul 60950-1:2003, first edition, underwriters laboratories, inc., standard for safety of information technology equipment. b) can/csa c22.2, no. 60950-1-03 1 st ed. april 1, 2003, canadian standards association, standard for safety of information technology equipment. c) en 60950-1:2001, first edition, european committee for electrotechnical standardization(cenelec) european standard for safety of information technology equipment. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 22 / 27 lp101wh1 liquid crystal display ver. 1.0 nov. 5 2009 8. packing 8-1. designation of lot mark a) lot mark a b c d e f g h i j k l m a,b,c : size(inch) d : year e : month f ~ m : serial no. note 1. year 2. month mark year 0 2010 6 2006 7 2007 8 2008 9 2009 4 2004 5 2005 3 2 1 2003 2002 2001 b nov mark month a oct 6 jun 7 jul 8 aug 9 sep 4 apr 5 may c 3 2 1 dec mar feb jan b) location of lot mark serial no. is printed on the label. the label is attached to the backside of the lcd module. this is subject to change without prior notice. 8-2. packing form a) package quantity in one box : 40 pcs b) box size : 395mm 390mm 309mm www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 23 / 27 lp101wh1 liquid crystal display ver. 1.0 nov. 5 2009 9. precautions please pay attention to the followings when you use this tft lcd module. 9-1. mo unting precautions (1) you must mount a module using holes arranged in four corners or four sides. (2) you should consider the mounting structure so that uneven force (ex. twisted stress) is not applied to the module. and the case on which a module is mounted s hould have sufficient strength so that external force is not transmitted directly to the module. (3) please attach the surface transparent protective plat e to the surface in order to protect the polarizer. transparent protective plate should have sufficient strength in order to the resist external force. (4) you should adopt radiation structure to satisfy the temperature specification. (5) acetic acid type and chlorine type materials for the cover case are not desirable because the former generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit break by electro-chemical reaction. (6) do not touch, push or rub the exposed polarizers with glass, tweezers or anything harder than hb pencil lead. and please do not rub with dust clothes with chemical treatment. do not touch the surface of polarizer for bare hand or greasy cloth.(some cosmetics are detrimental to the polarizer.) (7) when the surface becomes dusty, please wipe gently wi th absorbent cotton or other soft materials like chamois soaks with petroleum benzene. normal-hexane is recommended for cleaning the adhesives used to attach front / rear polarizers. do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (8) wipe off saliva or water drops as soon as possib le. their long time contact with polarizer causes deformations and color fading. (9) do not open the case because inside circuits do not have sufficient strength. 9-2. operating precautions (1) the spike noise causes the mis-operation of circuits. it should be lower than following voltage : v= 200mv(over and under shoot voltage) (2) response time depends on the temperature.(in lower temperature, it becomes longer.) (3) brightness depends on the temperature. (in lower temperature, it becomes lower.) and in lower temperature, response time(required time that brightness is stable after turned on) becomes longer. (4) be careful for condensation at sudden temperatur e change. condensation makes damage to polarizer or electrical contacted parts. and after fading condensation, smear or spot will occur. (5) when fixed patterns are displayed for a l ong time, remnant image is likely to occur. (6) module has high frequency circuits. sufficient suppression to the electromagnetic interference shall be done by system manufacturers. grounding and shielding methods may be important to minimized the interference. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 24 / 27 lp101wh1 liquid crystal display ver. 1.0 nov. 5 2009 since a module is composed of electronic circuits, it is not strong to electrostatic discharge. make certain that treatment persons are connected to ground through wris t band etc. and don?t touch interface pin directly. 9-3. electrostatic discharge control strong light exposure causes degradation of polarizer and color filter. 9-4. precautions for strong light exposure 9-5. storage (1) when the protection film is peeled off, static el ectricity is generated between the film and polarizer. this should be peeled off slowly and carefully by people who are electrically grounded and with well ion-blown equipment or in such a condition, etc. (2) the protection film is attached to the polarizer with a small amount of glue. if some stress is applied to rub the protection film against the polarizer during the time you peel off the film, the glue is apt to remain on the polarizer. please carefully peel off the protection film without rubbing it against the polarizer. (3) when the module with protection film attached is stored for a long time, sometimes there remains a very small amount of glue still on the polarize r after the protection film is peeled off. (4) you can remove the glue easily. when the glue remains on the polarizer surface or its vestige is recognized, please wipe them off with absorbent cotton waste or other soft material like chamois soaked with normal-hexane. 9-6. handling precaution s for protection film when storing modules as spares for a long time, the following precautions are necessary. (1) store them in a dark place. do not expose the module to sunlight or fluorescent light. keep the temperature between 5 c and 35 c at normal humidity. (2) the polarizer surface should not come in contact with any other object. it is recommended that they be stored in the container in which they were shipped. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 25 / 27 lp101wh1 liquid crystal display ver. 1.0 nov. 5 2009 appendix a. enhanced extended di splay identification data (eedid tm ) 1/3 byte (dec) byte (hex) field name and comments value (hex) value (bin) 0 00 header 00 00000000 1 01 header ff 11111111 2 02 header ff 11111111 3 03 header ff 11111111 4 04 header ff 11111111 5 05 header ff 11111111 6 06 header ff 11111111 7 07 header 00 00000000 8 08 id manufacture name lgd 30 00110000 9 09 id manufacture name e4 11100100 10 0a id product code 0269h 69 01101001 11 0b ( hex. lsb first ) 02 00000010 12 0c id serial no. - optional ("00h" if not used, number only and lsb first) 00 00000000 13 0d id serial no. - optional ("00h" if not used, number only and lsb first) 00 00000000 14 0e id serial no. - optional ("00h" if not used, number only and lsb first) 00 00000000 15 0f id serial no. - optional ("00h" if not used, number only and lsb first) 00 00000000 16 10 week of manufacture - optinal 00 weeks 00 00000000 17 11 year of manufacture 2009 years 13 00010011 18 12 edid structure version # = 1 01 00000001 19 13 edid revision # = 4 04 00000100 20 14 video input definition = input is a digital video signal interface , colo bit depth : 6 bits per primary color , digital video interface standard supported: digital interface is not defined 90 10010000 21 15 horizontal screen size (rounded cm) = 22 cm 16 00010110 22 16 vertical screen size (rounded cm) = 13 cm 0d 00001101 23 17 display transfer characteristic (gamma) = (gamma*100)-100 = example:(2.2*100)- 100=120 = 2.2 gamma 78 01111000 24 18 feature support [ display power management(dpm) : standby mode is not supported, suspend mode is not supported, active off = very low power is not supported ,supportted color encoding formats : rgb 4:4:4 & ycrcb 4:4:4 ,other feature support flags : no_srgb, preferred timing mode, no_display is continuous frequency (multi-mode_base edid and extension block).] 0a 00001010 25 19 red/green low bits (rxry/gxgy) bf 10111111 26 1a blue/white low bits (bxby/wxwy) 45 01000101 27 1b red x rx 95 10010101 28 1c red y ry 58 01011000 29 1d green x gx 52 01010010 30 1e green y gy 8a 10001010 31 1f blue x bx 28 00101000 32 20 blue y by 25 00100101 33 21 white x wx = 0.313 50 01010000 34 22 white y wy = 0.329 54 01010100 35 23 established timing 1 ( optional_00h if not used) 00 00000000 36 24 established timing 2 ( optional_00h if not used) 00 00000000 37 25 manufacturer's timings ( optional_00h if not used) 00 00000000 38 26 standard timing id1 ( optional_01h if not used) 01 00000001 39 27 standard timing id1 ( optional_01h if not used) 01 00000001 40 28 standard timing id2 ( optional_01h if not used) 01 00000001 41 29 standard timing id2 ( optional_01h if not used) 01 00000001 42 2a standard timing id3 ( optional_01h if not used) 01 00000001 43 2b standard timing id3 ( optional_01h if not used) 01 00000001 44 2c standard timing id4 ( optional_01h if not used) 01 00000001 45 2d standard timing id4 ( optional_01h if not used) 01 00000001 46 2e standard timing id5 ( optional_01h if not used) 01 00000001 47 2f standard timing id5 ( optional_01h if not used) 01 00000001 48 30 standard timing id6 ( optional_01h if not used) 01 00000001 49 31 standard timing id6 ( optional_01h if not used) 01 00000001 50 32 standard timing id7 ( optional_01h if not used) 01 00000001 51 33 standard timing id7 ( optional_01h if not used) 01 00000001 52 34 standard timing id8 ( optional_01h if not used) 01 00000001 53 35 standard timing id8 ( optional_01h if not used) 01 00000001 header vendor / product display vendor / product establ ished standard timing id www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 26 / 27 lp101wh1 liquid crystal display ver. 1.0 nov. 5 2009 appendix a. enhanced extended di splay identification data (eedid tm ) 2/3 byte (dec) byte (hex) field name and comments value (hex) value (bin) 54 36 pi xe l cl oc k/10 , 000 (lsb) 71 mh z @ 60hz bc 10111100 55 37 pixel clock/10,000 (msb) 1b 00011011 56 38 h or i zon t a l a c ti ve (ha) (l ower 8 bit s ) 1366 pixels 56 01010110 57 39 h or i zon t a l bl an ki ng (hb) (l ower 8 bit s ) 132 pixels 84 10000100 58 3a horizontal active / horizontal blanking(ha hb) (upper 4:4bits) 50 01010000 59 3b v er ti ca l a v ti ve (va) 768 lines 00 00000000 60 3c v er ti ca l bl an ki ng (vb) (de bl an ki ng t yp. f or de on l y pane l s ) 22 lines 16 00010110 61 3d vertical active / vertical blanking (va vb) (upper 4:4bits) 30 00110000 62 3e h or i zon t a l f ron t p orc h i n p i xe l s (hf) (l ower 8 bit s ) 48 pixels 30 00110000 63 3f h or i zon t a l s ync p u l se width i n p i xe l s (hs) (l ower 8 bit s ) 32 pixels 20 00100000 64 40 vertical front porch in lines (vf) (lower 4 b its) : vertical sync pl use width in lines (vs) (lower 4 bits) 3 lines : 5 lines 35 00110101 65 41 horizontal front porch/ sync pulse width/ vertical front porch/ sync pulse width (upper 2bits) 00 00000000 66 42 h or i zonta l v e di o i mage si ze ( mm ) (l ower 8 bi ts ) 223 mm df 11011111 67 43 v ert i ca l v e di o i mage si ze ( mm ) (l ower 8 bi ts ) 125 mm 7d 01111101 68 44 horizontal image size / vertical image size (upper 4 bits) 00 00000000 69 45 horizontal border = 0 (zero for notebook lcd) 00 00000000 70 46 vertical border = 0 (zero for notebook lcd) 00 00000000 71 47 non-interlace, normal display, no stereo, digital separate [ vsync_neg, hsync_pos (outside of v-sync) ] 1b 00011011 72 48 pixel clock/10,000 (lsb) 71 mhz @ 60hz bc 10111100 73 49 pixel clock/10,000 (msb) 1b 00011011 74 4a horizontal active (ha) (lower 8 bits) 1366 pix e l s 56 01010110 75 4b horizontal blanking (hb) (lower 8 bits) 132 pixels 84 10000100 76 4c horizontal active / horizontal blanking(ha hb) (upper 4:4bits) 50 01010000 77 4d vertical avtive (va) 768 lines 00 00000000 78 4e vertical blanking (vb) (de blanking typ.for de only panels) 22 lines 16 00010110 79 4f vertical active / vertical blanking (va vb) (upper 4:4bits) 30 00110000 80 50 horizontal front porch in pixels (hf) (lower 8 bits) 48 pixels 30 00110000 81 51 horizontal sync pulse width in pixels (hs) (lower 8 bits) 32 pixels 20 00100000 82 52 vertical front porch in lines (vf) (lower 4 b its) : vertical sync pl use width in lines (vs) (lower 4 bits) 3 lines : 5 lines 35 00110101 83 53 horizontal front porch/ sync pulse width/ vertical front porch/ sync pulse width (upper 2bits) 00 00000000 84 54 h or i zonta l v e di o i mage si ze ( mm ) (l ower 8 bi ts ) 223 mm df 11011111 85 55 v ert i ca l v e di o i mage si ze ( mm ) (l ower 8 bi ts ) 125 mm 7d 01111101 86 56 horizontal image size / vertical image size (upper 4 bits) 00 00000000 87 57 horizontal border = 0 (zero for notebook lcd) 00 00000000 88 58 vertical border = 0 (zero for notebook lcd) 00 00000000 89 59 non-interlace, normal display, no stereo, digital separate [ vsync_neg, hsync_pos (outside of v-sync) ] 1b 00011011 90 5a flag 00 00000000 91 5b flag 00 00000000 92 5c flag 00 00000000 93 5d data type tag : alphanumeric data string (ascii string) fe 11111110 94 5e flag 00 00000000 95 5f dell p/n 1st character = r 52 01010010 96 60 dell p/n 2nd character = k 4b 01001011 97 61 dell p/n 3rd character = d 44 01000100 98 62 dell p/n 4th character = y 59 01011001 99 63 dell p/n 5th character = 3 33 00110011 100 64 edid revision build name = mp(x-build) , revision # = a00 80 10000000 101 65 manufacturer p/n = 1 31 00110001 102 66 manufacturer p/n = 0 30 00110000 103 67 manufacturer p/n = 1 31 00110001 104 68 manufacturer p/n = w 57 01010111 105 69 manufacturer p/n = h 48 01001000 106 6a manufacturer p/n = 1 31 00110001 107 6b manufacturer p/n (if < 13 char, then terminate with asc code 0ah,set remaining char = 20h) 0a 00001010 timing descriptor #1 timing descriptor #2 timing descriptor #3 www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 27 / 27 lp101wh1 liquid crystal display ver. 1.0 nov. 5 2009 appendix a. enhanced extended di splay identification data (eedid tm ) 3/3 byte (dec) byte (hex) field name and comments value (hex) value (bin) 108 6c flag 00 00000000 109 6d flag 00 00000000 110 6e flag 00 00000000 111 6f data type tag : descript or defined by manufacturer 00 00000000 112 70 flag 00 00000000 113 71 color management [ no +2 frc support, true color depth : 6 bit ] 00 00000000 114 72 panel type [ wled] , configuration [ single light bar ], number lamp or led light bar [ one ] 41 01000001 115 73 frame rate details [ minimum frame rate : 60hz, maximum frame rate : 65hz , tcon provides native intel drrs / sdrrs support ] 33 00110011 116 74 controller interface and maximum luminance [ pwm type, 250 nit ] 99 10011001 117 75 front sur f ace / po l ar i zer [ g l ossy / true- lif e, no trans fl ect i ve ] , p i xe l structure [ rgb v- stripe ] 01 00000001 118 76 multi-media features [ color management : ntsc, dynamic backlight control : no ] 00 00000000 119 77 multi-media features [ motion blur : no support , active gamma control : no support ] 00 00000000 120 78 s pec i a l features [ w i re l ess en h ancement har d ware : no support , in- c e ll s canner : no support ] 00 00000000 121 79 special features [ number of lvds channels or edp lanes : one , overdrive : no ,interface : lvds , in-cell touch support : no ] 01 00000001 122 7a special features [ bist support : yes , electron ic privacy : no electronic privacy hardware support , 3-d support : no ] 01 00000001 123 7b (if<13 char--> 0ah, then terminate with asc code 0ah,set remaining char = 20h) 0a 00001010 124 7c (if<13 char--> 0ah, then terminate with asc code 0ah,set remaining char = 20h) 20 00100000 125 7d (if<13 char--> 0ah, then terminate with asc code 0ah,set remaining char = 20h) 20 00100000 126 7e extension flag (# of optional 128 panel id extension block to follow, typ = 0) 00 00000000 127 7f check sum (the 1-byte sum of all 128 by tes in this panel id block shall = 0) 35 00110101 timing descriptor #4 check sum www.datasheet.net/ datasheet pdf - http://www..co.kr/

▲Up To Search▲

Price & Availability of LP101WH1-TLA3

	To Download LP101WH1-TLA3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .